Additional Information

Site Information

 Loading... Please wait...

Elma Ultrasonic Cleaner xtra ST 800H

Heavy-Duty Commercial Ultrasonic Cleaner for Production Lines

  • Length:
    19.70 in.
  • Width:
    13.00 in.
  • Depth:
    19.70 in.
  • Volume:
    21.9 gal.

- 22-gallon heavy duty tank cleans large parts
- Clean at 25 or 45 kHz depending on the product
- Unmatched power in the Pulse mode
- Performance-enhancing Dynamic and Sweep modes
- Comprehensive, custom cleaning cycle programming
- "Plug-and-play" replaceable electronics

QTY:
$9,020.00

Product Details

Heavy-Duty Commercial Ultrasonic Cleaner for Production Lines

LED control panel: Clearly displays all set and actual operational parameters 

Benefit: Allows for quick, easy setting and monitoring of process status

Dual-Frequency:  Set unit to clean at 25 kHz or 45 kHz

Benefit: Accomplish a broad range of cleaning tasks with a single ultrasonic cleaner

Sweep mode: Continuous slight frequency variation eliminates hot spots, dead zones and standing waves

Benefit: Provides uniform and thorough cleaning; prevents damage to electronic components    

Pulse mode:  Produces intense bursts of increased ultrasonic power

Benefit: Removes stubborn contaminants; quickly degasses fresh solutions

Dynamic mode:  Unit auto-switches between sweep and pulse modes

Benefit:  Faster cleaning results for highly soiled, difficult-to-clean products

Heater: Thermostatically adjustable heater 30° to 80°C

Benefit: Improves cleaning effectiveness; required for removing grease and oil

Timer:  Set from 1 - 30 minutes or continuous with manual shut off 

Benefit:  Lets you “set and forget” cleaning cycle and attend to other matters

Safety auto-off: Shuts down after 12 hours continuous operation or if liquid reaches 90°C

Benefit: Prevents damage to parts and the equipment if you fail to shut it off

Drain:  Side-mounted stainless steel ball valve

Benefit:  Speeds solution changes and tank cleaning

The heavy-duty industrial-scale Elma xtra ST800H commercial ultrasonic cleaner is designed and constructed to provide years of reliable service on your production or parts cleaning line.  Everything from its welded cavitation-resistant stainless steel tank to its programmable cleaning cycle control panel is aimed at solving the challenging cleaning tasks you face on a regular basis.

A commercial ultrasonic cleaner with built-in efficiencies

Time is money and the Elma xtra ST800H commercial ultrasonic cleaner will save you both.  Degassing new solutions, for example, can take too much time especially when it involves 22 gallons of the stuff.  Activate the Pulse mode on this beauty and complete the job in about 10 minutes, putting you into an operational mode far faster than similarly sized ultrasonic cleaners.  And because you can heat the solution during degassing you save more time. 

Then it’s simply a matter of setting time and temperature cleaning cycles matched to the cleaning job at hand.  Functions and their status are indicated by LED displays with safety shutoffs to prevent damage from overheating or excessive untended operation.  In fact, so intuitive is the control panel on this commercial ultrasonic cleaner you probably won’t need the instruction manual.  But study it anyway.

Yes, accidents happen.  If your control or generator components go bad, you can simply swap them out with a spare modular unit that auto-tunes to the transducers.  You’re back in operation in a jiffy.    

Many good things about the Xtra ST800H commercial ultrasonic cleaner

  • Precision German construction
  • Dynamic sweep/pulse mode for enhanced cleaning action
  • Welded tank construction warranted for 3 years
  • Attractively styled easily cleaned stainless steel housing
  • Roller mounts for easy moving; roller stops hold unit in place
  • Full function ergonomic control panel
  • Control and generator components can be quickly exchanged
  • Two basket positions for cleaning and draining
  • Side-mounted ball valve drain
  • Slanted tank floor for fast draining
  • Comprehensive operations manual
  • Options include baskets, stainless steel lid, and hinged flip-top sound-deadening cover

Questions?  Contact the ultrasonic cleaning experts at iUltrasonic.

We’ll help you select the right sized ultrasonic equipment, the correct biodegradable solution concentrates and operating procedures to get the highest productivity possible from your ultrasonic cleaner investment.  

FREE GUIDE TO ULTRASONIC CLEANING APPLICATIONS

Your information is secure and will not be shared with a third party or spammed