Additional Information

Site Information

 Loading... Please wait...

Elma Ultrasonic Cleaner xtra ST 600H

Ideal Ultrasonic Cleaners for Manufacturing Facilities

  • Length:
    19.70 in.
  • Width:
    13.00 in.
  • Depth:
    13.80 in.
  • Volume:
    15.3 gal.

- Fully programmable cleaning cycles
- 15 gallon welded tanks warranted for 3 years
- Cleaning at 25 or 45 kHz equals increased utility
- Most powerful Pulse mode in the industry
- Sweep mode uniformly distributes cleaning action
- Dynamic sweep/pulse mode for benefits of both

QTY:
$7,118.00

Product Details

Ideal Ultrasonic Cleaners for Manufacturing Facilities

LED control panel: Clearly displays all set and actual operational parameters 

Benefit: Allows for quick, easy setting and monitoring of process status

Dual-Frequency:  Set unit to clean at 25 kHz or 45 kHz

Benefit: Accomplish a broad range of cleaning tasks with a single ultrasonic cleaner

Sweep mode: Continuous slight frequency variation eliminates hot spots, dead zones and standing waves

Benefit: Provides uniform and thorough cleaning; prevents damage to electronic components    

Pulse mode:  Produces intense bursts of increased ultrasonic power

Benefit: Removes stubborn contaminants; quickly degasses fresh solutions

Dynamic mode:  Unit auto-switches between sweep and pulse modes

Benefit:  Faster cleaning results for highly soiled, difficult-to-clean products

Heater: Thermostatically adjustable heater 30° to 80°C

Benefit: Improves cleaning effectiveness; required for removing grease and oil

Timer:  Set from 1 - 30 minutes or continuous with manual shut off 

Benefit:  Lets you “set and forget” cleaning cycle and attend to other matters

Safety auto-off: Shuts down after 12 hours continuous operation or if liquid reaches 90°C

Benefit: Prevents damage to parts and the equipment if you fail to shut it off

Drain:  Side-mounted stainless steel ball valve

Benefit:  Speeds solution changes and tank cleaning

Manufacturing facilities looking to upgrade their ultrasonic cleaning capabilities should take a close look at Elma xtra ST600H as ideal ultrasonic cleaners to get the job done fast.  It won’t take long to figure out that these units offer features that contribute immeasurably to faster throughput.  That’s because they can be programmed to handle virtually any ultrasonic cleaning job coming down the production line.  What does that mean? It simply means that the xtra ST600H can do what otherwise would require you to invest in multiple ultrasonic cleaner models instead of one.

A special feature is the easily accessed and removed unitized control and ultrasonic generator component.  If servicing is required it can be quickly swapped out with a spare so operations can continue with minimum disruption.  

Cycle programming with Elma xtra ST600H ideal ultrasonic cleaners

The secret is the intuitive operating panel liberally equipped with LED displays that indicate exactly what is going on.  In addition to the on-off button there’s one to set the ultrasonic frequency (25 or 45 kHz).  Set and elapsed cleaning time are indicated in increments to 30 minutes with auto shut-off or permanent operation to a maximum of 12 hours with manual shut-off.  It also shows set and actual solution temperatures.   The unit will auto start when the set solution temperature is reached within the operating range of 30° to 80°C and there is an auto safety shut-off at 90°C.  Or the unit can be started manually.  Activate the pulse mode button for fast solution degassing or for blasts of added ultrasonic cleaning power.

Or, activate the dynamic mode button to alternate pulse and sweep for enhanced cleaning action.  A quick sum-up: The combined features of the Elma xtra ST600H mean that you and your team can handle virtually any task that enters your shop.

Order the Elma xtra ST600H ultrasonic cleaner and get

  • Precision German construction
  • Dynamic sweep/pulse mode for enhanced cleaning action
  • Welded tank construction warranted for 3 years
  • Attractively styled easily cleaned stainless steel housing
  • Roller mounts for easy moving; roller stops hold unit in place
  • Full function ergonomic control panel
  • Control and generator components can be quickly exchanged
  • Two basket positions for cleaning and draining
  • Side-mounted ball valve drain
  • Slanted tank floor for fast draining
  • Comprehensive operations manual
  • Options include baskets, stainless steel lid, and hinged flip-top sound-deadening cover

Questions?  Contact the ultrasonic cleaning experts at iUltrasonic.

We’ll help you select the right sized ultrasonic equipment, the correct biodegradable solution concentrates and operating procedures to get the highest productivity possible from your ultrasonic cleaner investment.         

FREE GUIDE TO ULTRASONIC CLEANING APPLICATIONS

Your information is secure and will not be shared with a third party or spammed