Product Details
Dual-Frequency Industrial Ultrasonic Cleaning Systems
LED control panel: Clearly displays all set and actual operational parameters | Benefit: Allows for quick, easy setting and monitoring of process status |
Dual-Frequency: Set unit to clean at 25 kHz or 45 kHz | Benefit: Accomplish a broad range of cleaning tasks with a single ultrasonic cleaner |
Sweep mode: Continuous slight frequency variation eliminates hot spots, dead zones and standing waves | Benefit: Provides uniform and thorough cleaning; prevents damage to electronic components |
Pulse mode: Produces intense bursts of increased ultrasonic power | Benefit: Removes stubborn contaminants; quickly degasses fresh solutions |
Dynamic mode: Unit auto-switches between sweep and pulse modes | Benefit: Faster cleaning results for highly soiled, difficult-to-clean products |
Heater: Thermostatically adjustable heater 30° to 80°C | Benefit: Improves cleaning effectiveness; required for removing grease and oil |
Timer: Set from 1 - 30 minutes or continuous with manual shut off | Benefit: Lets you “set and forget” cleaning cycle and attend to other matters |
Safety auto-off: Shuts down after 12 hours continuous operation or if liquid reaches 90°C | Benefit: Prevents damage to parts and the equipment if you fail to shut it off |
Drain: Side-mounted stainless steel ball valve | Benefit: Speeds solution changes and tank cleaning |
The Elma xtra ST line of industrial ultrasonic cleaning systems represents the pinnacle of engineering in cleaning performance and flexibility. If your shop is ready for advanced ultrasonic cleaning performance the Elma xtra ST300H is an excellent way to begin. With its 8 gallon capacity heavy duty stainless steel tank it is ready to take on virtually any cleaning task that comes in your door.
How Elma xtra ST300H ultrasonic cleaning systems make life easier
In addition to giving you a choice of coarse cleaning at 25 kHz or fine cleaning at 45 kHz these units are equipped with an automatic sweep function that assures fast, thorough, uniform cleaning. Activate the pulse mode to degas new solutions in 5 to 10 minutes and to remove recalcitrant contaminants. Or activate the dynamic sweep/pulse mode to get the benefit of both modes. Cleaning starts when the solution reaches the pre-set temperature (30° to 80°C) with an auto safety shut-off at 90°C. Control cleaning time in increments to 30 minutes with auto shut off, or permanent on with a 12-hour auto shut off if you forget. Operating parameters are signaled with LED displays so you know at a glance what’s going on.
Even servicing is easier with the xtra ST systems because the modular one-piece control and generator components can be quickly removed and exchanged.
More on the Elma xtra ST300H ultrasonic cleaning systems
- Precision German construction
- Dynamic sweep/pulse mode for enhanced cleaning action
- Welded tank construction warranted for 3 years
- Attractively styled easily cleaned stainless steel housing
- Roller mounts for easy moving; roller stops hold unit in place
- Full function ergonomic control panel
- Control and generator components can be quickly exchanged
- Two basket positions for cleaning and draining
- Side-mounted ball valve drain
- Slanted tank floor for fast draining
- Comprehensive operations manual
- Options baskets, stainless steel lid, and hinged flip-top sound-deadening cover
Questions? Contact the ultrasonic cleaning experts at iUltrasonic.
We’ll help you select the right sized ultrasonic equipment, the correct biodegradable solution concentrates and operating procedures to get the highest productivity possible from your ultrasonic cleaner investment.
Dual-Frequency Industrial Ultrasonic Cleaning Systems
- Length:
11.80 in. - Width:
11.80 in. - Depth:
11.80 in. - Volume:
7.9 gal.
- 25 or 45 kHz frequencies for coarse or fine cleaning
- Sweep mode for safe, uniform cleaning
- Powerful Pulse mode removes tenacious contaminants
- Full control of cleaning time and temperature
- Superior stainless steel construction
- Roller mounted for ease in relocation