Product Details
Ultrasonic Cleaners for Industrial Applications
| LED control panel: Clearly displays all set and actual operational parameters | Benefit: Allows for quick, easy setting and monitoring of process status |
| Dual-Frequency: Set unit to clean at 25 kHz or 45 kHz | Benefit: Accomplish a broad range of cleaning tasks with a single ultrasonic cleaner |
| Sweep mode: Continuous slight frequency variation eliminates hot spots, dead zones and standing waves | Benefit: Provides uniform and thorough cleaning; prevents damage to electronic components |
| Pulse mode: Produces intense bursts of increased ultrasonic power | Benefit: Removes stubborn contaminants; quickly degasses fresh solutions |
| Dynamic mode: Unit auto-switches between sweep and pulse modes | Benefit: Faster cleaning results for highly soiled, difficult-to-clean products |
| Heater: Thermostatically adjustable heater 30° to 80°C | Benefit: Improves cleaning effectiveness; required for removing grease and oil |
| Timer: Set from 1 - 30 minutes or continuous with manual shut off | Benefit: Lets you “set and forget” cleaning cycle and attend to other matters |
| Safety auto-off: Shuts down after 12 hours continuous operation or if liquid reaches 90°C | Benefit: Prevents damage to parts and the equipment if you fail to shut it off |
| Drain: Side-mounted stainless steel ball valve | Benefit: Speeds solution changes and tank cleaning |
Elma’s 43-gallon capacity xtra ST1600H ultrasonic cleaners for industrial applications are highly popular for mid-to-large size companies facing multiple cleaning challenges where the power of ultrasonic cleaning is relied on to remove contaminants from a variety of surfaces and finishes. Select 45 kHz for fine cleaning such as removing fingerprints, dust, and grease; select 25 kHz for coarse cleaning of cast and fabricated parts. The powerful operator-activated pulse mode sends a 20% increase in cleaning power through the bath to remove tough contaminants and also speeds degassing fresh cleaning solutions.
User-friendly controls for customized cleaning cycles
Check out the user-friendly control panel on the Elma xtra ST1600H ultrasonic cleaner and you’ll quickly see that it can handle most any cleaning task that comes into your shop. All functions are indicated by LEDs so you know at a glance what’s going on. Note the “dynamic” control, a great feature that alternates the unit’s Sweep and Pulse modes for up to 10 minutes to deliver enhanced cleaning of difficult configurations.
Cleaning cycle time and cleaning temperature controls are adjacent to LEDs that indicate set (permanent) and actual (flashing). As a safety measure the unit will shut off if the solution temperature exceeds 90°C and, if you set time beyond 30 minutes, after 12 hours continuous operation. These features protect your Elma xtra ST1600H investment and the products being cleaned from damage.
Should electronics servicing be required the easily swapped-out one-piece control and generator assembly reduces downtime to a minimum. With a spare unit on hand there is no interruption to your operations while the primary electronics and control module is serviced.
Here’s what you get with Elma xtra ST1600H ultrasonic cleaners
- Precision German construction
- Dynamic sweep/pulse mode for enhanced cleaning action
- Welded tank construction warranted for 3 years
- Attractively styled easily cleaned stainless steel housing
- Roller mounts for easy moving; roller stops hold unit in place
- Full function ergonomic control panel
- Control and generator components can be quickly exchanged
- Two basket positions for cleaning and draining
- Side-mounted ball valve drain
- Slanted tank floor for fast draining
- Comprehensive operations manual
- Options include baskets, stainless steel lid, and hinged flip-top sound-deadening cover
Questions? Contact the ultrasonic cleaning experts at iUltrasonic.
We’ll help you select the right sized ultrasonic equipment, the correct biodegradable solution concentrates and operating procedures to get the highest productivity possible from your ultrasonic cleaner investment.
Ultrasonic Cleaners for Industrial Applications
- Length:
23.60 in. - Width:
23.60 in. - Depth:
17.70 in. - Volume:
42.8 gal.
- Extremely powerful cleaning
- Easy to operate, easy to maintain
- Dual frequency for coarse and fine cleaning
- Dynamic sweep/pulse mode handles complex cleaning tasks
- Time and temperature controls automate cleaning cycles
- Rugged stainless steel tank and housing for long service life
